收藏本站
ISL5416
TABLE 39. LOWER THRESHOLD, ATTENUATOR CHANGE (IWA = 0*13h) RESET STATE = 0x00000000h
CONTROL IS SHARED FOR AIN/BIN AND FOR CIN/DIN
THIS
P(31:0)
31:30
29:16
15:0
FUNCTION
RESERVED. Set to 0.
ATTENUATION STEP 3.
Amount to decrease the attenuation control register if the average input magnitude is below the lower threshold. 14-bit value loads
the LSBs of a 17-bit accumulator. The 3 MSBs of the 17-bit load are hard-wired to “111” , so the load value should be masked from
a negative number. The MSB of the 14-bit value is weighted at 6 dB so the value at all zeros would be ~12 dB (decrease in
attenuation).
THRESHOLD 3.
Lower threshold value. If the accumulated and normalized input magnitude is below this value, the attenuation control accumulator is
adjusted by the amount programmed in bits 29:16.
TABLE 40. UPPER THRESHOLD, ATTENUATOR CHANGE (IWA = 0*14h) RESET STATE = 0x00000000h
CONTROL IS SHARED FOR AIN/BIN AND FOR CIN/DIN
THIS
P(31:0)
31:30
29:16
15:0
FUNCTION
RESERVED. Set to 0.
ATTENUATION STEP 2.
Amount to increase the attenuation control register if the average input magnitude is above the upper threshold. 14-bit value loads
the LSBs of a 17-bit accumulator. The 3 MSBs of the 17-bit load are hard-wired to “000” . The MSB of the 14-bit value is weighted at
6 dB so the value at all ones would be ~12 dB (increase in attenuation).
THRESHOLD 2.
Upper threshold value. If the accumulated and normalized input magnitude is above this value, the attenuation control accumulator
is adjusted by the amount programmed in bits 29:16.
TABLE 41. IMMEDIATE THRESHOLD, ATTENUATOR GAIN (IWA = 0*15h) RESET STATE = 0x00000000h
CONTROL IS SHARED FOR AIN/BIN AND FOR CIN/DIN
THIS
P(31:0)
31:30
29:16
15:0
FUNCTION
RESERVED. Set to 0.
ATTENUATION STEP 1.
Amount to increase the attenuation control register if the sample-by-sample input magnitude is above the immediate threshold. 14-
bit value loads the LSBs of a 17-bit accumulator. The 3 MSBs of the 17-bit load are hard-wired to “000” . The MSB of the 14-bit value
is weighted at 6 dB so the value at all ones would be ~12 dB (increase in attenuation). This change happens immediately. Subsequent
changes due to crossing this threshold are held off by the delay in location IWA = 0*10, bits 31:24.
THRESHOLD 1.
Immediate threshold value. If the input magnitude is above this value, the attenuation control accumulator is adjusted by the amount
programmed in bits 29:16.
NOTES ON THRESHOLDS:
The input range is -32768 to 32767 (0x8000 to 0x7FFF)
The magnitude range is 0 to 32768 ( 0x0000 to 0x8000)
The immediate threshold is 0 to 65536 (0x0000 to 0xFFFF)
The magnitude must be greater than the immediate threshold to trigger.
The integration period is 2 to 2 16 .
The integrated magnitude range is 0x00000000 to 0x80000000
The normalization divider range is 2 1 to 2 16 , so with the maximum dividers:
The averaged output is 0x0000 to 0x8000
The upper and lower thresholds are 0 to 65536 (0x0000 to 0xFFFF)
To trigger the upper and lower comparisons:
The magnitude must be greater than the upper threshold.
The magnitude must be less than lower threshold.
44
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
ISL55005IEZ-T7 IC AMP MMIC BIPO BROADBND SC70-6
ISL55007IEZ-T7 IC AMP MMIC BIPO BROADBND SC70-6
ISL55008IEZ-T7 IC AMP MMIC BIPO BROADBND SC70-6
ISL55009IEZ-T7 IC AMP MMIC BIPO BROADBND SC70-6
ISL55010IEZ-T7 IC AMP MMIC BIPO BROADBND SC70-6
ISL55011IEZ-T7 IC AMP MMIC BIPO BROADBND SC70-6
ISL55012IEZ-T7 IC AMP MMIC BIPO BROADBND SC70-6
ISL55013IEZ-T7 IC AMP MMIC BIPO BROADBND SC70-6
相关代理商/技术参数
ISL5416KI 功能描述:上下转换器 QUAD WIDEBAND DOWN CONVERTER, 256 CABGA RoHS:否 制造商:Texas Instruments 产品:Down Converters 射频:52 MHz to 78 MHz 中频:300 MHz LO频率: 功率增益: P1dB: 工作电源电压:1.8 V, 3.3 V 工作电源电流:120 mA 最大功率耗散:1 W 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-128
ISL5416KIZ 制造商:Intersil Corporation 功能描述:LEAD-FREE QUAD WIDEBAND DOWN CONVERTER, 256 CABGA - Trays 制造商:Intersil Corporation 功能描述:PB-FREE W/ANNEAL QUAD DIGITAL DOWNCONVER 制造商:Intersil 功能描述:QD WIDEB& DWN CNVRTR 256 CABGA
ISL54200 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:USB 2.0 High/Full Speed Multiplexer
ISL54200_07 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:USB 2.0 High/Full Speed Multiplexer
ISL54200EVAL1Z 功能描述:EVALUATION BOARD FOR ISL54200 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PCI Express® (PCIe) 主要目的:接口，收发器，PCI Express 嵌入式:- 已用 IC / 零件:DS80PCI800 主要属性:- 次要属性:- 已供物品:板
ISL54200IRUZ-T 功能描述:IC USB SWITCH DUAL SPDT 10UTQFN RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:- 标准包装:2,500 系列:- 功能:视频交叉点开关 电路:1 x 8:6 导通状态电阻:- 电压电源:单电源 电压 - 电源，单路/双路(±):3.135 V ~ 5.25 V 电流 - 电源:55mA 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:24-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:24-TSSOP 包装:带卷 (TR) 产品目录页面:1214 (CN2011-ZH PDF) 其它名称:FMS6502MTC24XTR
ISL54200IRZ 功能描述:IC USB SWITCH DUAL SPDT 10TDFN RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:36 系列:- 功能:多路复用器 电路:2 x 4:1 导通状态电阻:75 欧姆 电压电源:单/双电源 电压 - 电源，单路/双路(±):2 V ~ 12 V，±2 V ~ 6 V 电流 - 电源:- 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:20-SOIC（0.295"，7.50mm 宽） 供应商设备封装:20-SOIC W 包装:管件
ISL54200IRZ-T 功能描述:IC USB SWITCH DUAL SPDT 10TDFN RoHS:是 类别:集成电路 (IC) >> 接口 - 模拟开关，多路复用器，多路分解器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:36 系列:- 功能:多路复用器 电路:2 x 4:1 导通状态电阻:75 欧姆 电压电源:单/双电源 电压 - 电源，单路/双路(±):2 V ~ 12 V，±2 V ~ 6 V 电流 - 电源:- 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:20-SOIC（0.295"，7.50mm 宽） 供应商设备封装:20-SOIC W 包装:管件